Gathering and Analyzing Baseline Performance Data

Analyzing performance is a systematic process that starts with gathering baseline data. OS X provides several applications that you can use to assess baseline performance for an OpenGL application:

• top is a command-line utility that you run in the Terminal window. You can use top to assess how much CPU time your application consumes.

• OpenGL Profiler is an application that determines how much time an application spends in OpenGL. It also provides function traces that you can use to look for redundant calls.

• OpenGL Driver Monitor lets you gather real-time data on the operation of the GPU and lets you look at information (OpenGL extensions supported, buffer modes, sample modes, and so forth) for the available renderers.

This section shows how to use top along with OpenGL Profiler to analyze where to spend your optimization efforts—in your OpenGL code, your other application code, or in both. You'll see how to gather baseline data and how to determine the relationship of OpenGL performance to overall application performance.

1. Launch your OpenGL application.

2. Open a Terminal window and place it side-by-side with your application window.

3. In the Terminal window, type top and press Return. You'll see output similar to that shown in Figure 15-1.

   The top program indicates the amount of CPU time that an application uses. The CPU time serves as a good baseline value for gauging how much tuning your code needs. Figure 15-1 shows the percentage of CPU time for the OpenGL application GLCarbon1C (highlighted). Note this application utilizes 31.5% of CPU resources.

   

4. Open the OpenGL Profiler application, located in /Developer/Applications/Graphics Tools/. In the window that appears, select the options to collect a trace and include backtraces, as shown in Figure 15-2.

   

5. Select the option “Attach to application”, then select your application from the Application list.

   You may see small pauses or stutters in the application, particularly when OpenGL Profiler is collecting a function trace. This is normal and does not significantly affect the performance statistics. The glitches are due to the large amount of data that OpenGL Profiler is writing out.

6. Click Suspend to stop data collection.

7. Open the Statistics and Trace windows by choosing them from the Views menu.

   Figure 15-3 provides an example of what the Statistics window looks like. Figure 15-4 shows a Trace window.

   The estimated percentage of time spent in OpenGL is shown at the bottom of Figure 15-3. Note that for this example, it is 28.91%. The higher this number, the more time the application is spending in OpenGL and the more opportunity there may be to improve application performance by optimizing OpenGL code.

   You can use the amount of time spent in OpenGL along with the CPU time to calculate a ratio of the application time versus OpenGL time. This ratio indicates where to spend most of your optimization efforts.

   

8. In the Trace window, look for duplicate function calls and redundant or unnecessary state changes.

   Look for back-to-back function calls with the same or similar data. These are areas that can typically be optimized. Functions that are called more than necessary include glTexParameter, glPixelStore, glEnable, and glDisable. For most applications, these functions can be called once from a setup or state modification routine and called only when necessary.

   It's generally good practice to keep state changes out of rendering loops (which can be seen in the function trace as the same sequence of state changes and drawing over and over again) as much as possible and use separate routines to adjust state as necessary.

   Look at the time value to the left of each function call to determine the cost of the call.

   

9. Determine what the performance gain would be if it were possible to reduce the time to execute all OpenGL calls to zero.

   For example, take the performance data from the GLCarbon1C application used in this section to determine the performance attributable to the OpenGL calls.

   Total Application Time (from top) = 31.5%

   Total Time in OpenGL (from OpenGL Profiler) = 28.91%

   At first glance, you might think that optimizing the OpenGL code could improve application performance by almost 29%, thus reducing the total application time by 29%. This isn't the case. Calculate the theoretical performance increase by multiplying the total CPU time by the percentage of time spent in OpenGL. The theoretical performance improvement for this example is:

   31.5 X .2891 = 9.11%

   If OpenGL took no time at all to execute, the application would see a 9.11% increase in performance. So, if the application runs at 60 frames per second (FPS), it would perform as follows:

   New FPS = previous FPS * (1 +(% performance increase)) = 60 fps *(1.0911) = 65.47 fps

   The application gains almost 5.5 frames per second by reducing OpenGL from 28.91% to 0%. This shows that the relationship of OpenGL performance to application performance is not linear. Simply reducing the amount of time spent in OpenGL may or may not offer any noticeable benefit in application performance.

Using OpenGL Driver Monitor to Measure Stalls

You can use OpenGL Driver Monitor to measure how long the CPU waits for the GPU, as shown in Figure 15-5. OpenGL Driver Monitor is useful for analyzing other parameters as well. You can choose which parameters to monitor simply by clicking a parameter name from the drawer shown in the figure.